National Instruments VXI/VMEpc 600 series Getting Started Manual
Also see for VMEpc 600 series: User manualInstallation guide
                                                             | |
Contents
| 
©National Instruments CorporationA-1VXI/VMEpc 600 Series for Windows 95/NTADefault SettingsThis appendix summarizes the default settings for the hardware andsoftware in your kit. If you need more information about a particularsetting, or if you want to try a different configuration, please refer to theVXI/VMEpc 600 Series User Manual for your hardware reference and theT&M Explorer online help for your software reference.Because you can also use T&M Explorer to configure a VXI-MXI-2 or aVME-MXI-2, this appendix also summarizes the software default settingsfor the VXI/VME-MXI-2.VXI/VMEpc 600 SeriesThis section summarizes the hardware and software default settings for theVXI/VMEpc 600 Series. Notice that some of the jumpers described inTable A-1 are for VXI configuration only.Table A-1. VXI/VMEpc 600 Series Hardware Default SettingsJumper Description Default Setting DescriptionW1—Power On MITE SelfConfigurationEnabled. Do not alter this setting.W2—External Trigger InputTermination (VXI only)Do not terminateW3—SCSI Bus Termination EnabledW4—CLK10 SMB Direction(VXI only)Receive CLK10W5—CLK10 SMB Termination(VXI only)Do not terminateW6—CLK10 Source(VXI only)Source from onboard oscillator |
Related manuals for National Instruments VMEpc 600 series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine