1-34 | ni.comChapter 1 Getting Started with the cDAQ ControllerNote If you use shielded cabling to connect to a C Series module with a plasticconnector, you must attach the cable shield to the chassis grounding terminal using1.31 mm2 (16 AWG) or larger wire. Use shorter wire for better EMC performance.CPU eXpansion Module (CXM) ConnectorIn the future, the CXM connector will enable you to connect additional industry-standard I/O tothe cDAQ controller.CFast SSD ModuleThe CFast SSD module is the solid state hard drive of the cDAQ controller.Cables and AccessoriesTable 1-10 contains information about cables and accessories available for the cDAQ controller.For a complete list of cDAQ controller accessories and ordering information, refer to the pricingsection of the NI cDAQ-913x product page at ni.com.Table 1-10. Cables and AccessoriesAccessory Part NumberNI PS-15 power supply (24 VDC, 5 A, 100-120/200-240 VAC input) 781093-01NI PS-10 desktop DC power supply(24 VDC, 5 A, 100-120/200-240 VAC input)782698-01NI desktop mount kit 781988-01NI panel mount kit 781919-01NI DIN rail mount kit 781987-01NI rack mount kit with DIN rail 781989-01NI 9910 sliding rack mount kit with DIN rail 779102-01CAT-5E Ethernet cable, shielded (2, 5, and 10 m lengths) 151733-02, 151733-05,151733-10Industrial USB extension with retention cable (0.5 and 2 m lengths) 152166-xxDIN rail-mountable screw terminal adapter(COM 2 termination resistor connection)778674-01Cable adapters for 10-position modular jacks (1, 2, and 3 m lengths) 182845-01, 182845-02,182845-03MXI-Express cables (1, 3, and 7 m lengths) 779500-01, 779500-03,779500-07
