18Setting the Temperature74Lt / 90Lt / 95Lt Refrigerators have dual thermostats allowingindividual temperatures to be selected for each of the cooling bins.The “ FREEZER” bin has a temperature range between +20°C and -24°C.The “ FRIDGE” bin has a temperature range between +20°C and -12°C.It is important that the freezer thermostat should be set at the same or colder temperature than thefridge thermostat. This will ensure temperatures are accurately maintained and the refrigeratoroperates efficiently.To select the cooling temperature, press and hold the button until the display starts to flash.Press or to raise or lower the desired temperature. The thermostat will accept the newsetting and exit the setting mode 10 seconds after the last button was pressed.The same procedure is used on both thermostat controls.(NOTE: You can only set one thermostat at a time).The dual control will first operate to cool the R/H fridge binbefore switching to the L/H freezer bin.NB - Set one thermostat at a timeThe setting of the L/H bin as a fridge, and the R/H bin as a freezer is not an option. The reason for thisis that in order to achieve maximum efficiency (i.e. the lowest average battery power consumption), thegas-flows within the unit are intentionally biased to flow from the R/H bin to the L/H bin. Thus the freezinggas could flow from the R/H bin and freeze the contents of the L/H bin.Recommended Temperature SettingsL/H Freezer Bin R/H Fridge BinFridge / Freezer 6 6Freezer / Fridge - 6 2Freezer / Freezer -12 - 6Deep Freeze / Freezer -18 -12