25Dual-direction LidA special feature of the Weekender is the ability to change thedirection in which the lid opens.The most common configuration is the front-opening direction(shown).If the application prevents the lid from opening fully or therefrigerator is installed long ways into a vehicle, is may beadvantageous to use the side-opening configuration.The Weekender is supplied in the front-opening configuration.In order to change the lid direction, follow these steps :1. Close the lid. Remove both front latches andlid handles.2. Re-fit one of the latches and lid handles to thealternative latch positions on the side ofthe refrigerator. (Keep the spare parts safe)3. Remove all three hinges from the rear of therefrigerator. Also remove the hinge cover plates fromthe alternative hinge locations.4. Re-fit two of the hinges on the side of the refrigerator.5. Align the lid and ensure that it closes fully beforetightening the screws.6. Keep the spare hinge and screws in a safe place.The Weekender will now be in the side-opening configurationNOTE: Take care not to apply excessive pressure whenlocating the screws to the inside retaining nuts.(They can be pushed too far back or incorrectlyangled).Three hinge cover plates are supplied(2 fitted) with the Weekender for covering theunused hinge holes.Tip - The optional Weekender protection jacket hasa side pocket which is ideal for keeping the sparehinge and latch parts.