3. To adjust the OCTAVES reach of the Arpeggiator, turn Knob 6 (by default set to 1) to e.g.4.14.2 Using a Sustain Pedal to Control the ArpeggiatorYou can use a sustain pedal to control the Arpeggiator.► Pressing the sustain pedal while keys are held and then releasing those keys continuesthe arpeggiator sequence. This way the footswitch behaves as a trigger for the Arpeggia-tor. When a new key is pressed, the new note is added to the current sequence.► Releasing the sustain pedal with no keys pressed stops the sequence and all playingnotes. Releasing the sustain pedal with keys still pressed removes all notes from the se-quence except those corresponding to the pressed keys—the sequence continues with thepressed keys only.14.3 Using Arpeggiator Snapshots on the KeyboardThe Arpeggiator snapshots let you quickly recall four sets of Arpeggiator settings. This way youcan compare settings, or quickly switch between them during a performance. On the keyboard,the snapshots are mapped to Button 5–8 on the Control section when Arpeggiator Edit mode isselected. In the displays, they are labeled with their respective settings for the RATE parame-ter (e.g. 1/8, 1/16, 1/16 T, etc.).► To select a snapshot, press its corresponding button on the keyboard’s Control section.→ All settings associated with this snapshot are instantly recalled.► To change the settings associated with a snapshot, select it and adjust the parameters.→ The new settings are saved automatically, and you can switch forth and back betweensnapshots to recall them.Playing and Editing the ArpeggiatorUsing a Sustain Pedal to Control the ArpeggiatorKOMPLETE KONTROL - Manual - 193
