Prehear and Autoload are mutually exclusive: Only one of them can be active at a time.For more information on the Autoload feature, see section ↑3.3.1, Loading the SelectedFiles Automatically.Pre-Listening to Your Samples using the ControllerWhen browsing Samples on your controller:► Press SHIFT + Button 6 (PREHEAR) to enable/disable the Prehear function.When Prehear is enabled:▪ Turn Knob 4 to adjust the Prehear volume.▪ The Sample selected in the result list can be triggered from the pad of the focused Soundor from any pad without being loaded into that Sound.▪ Pressing any other pad triggers its Sound without changing the focus. To set the focus toanother Sound you have to press SELECT + its pad or to disable Prehear.▪ Turn the Control encoder or Knob 8 to select the previous or next Sample in the result list.Upon selection this Sample is played back and the previous Sample stops playing.▪ Button 5 (PREV) and 6 (NEXT) do not automatically load the Sample they select as theyusually do (see section ↑3.3.1, Loading the Selected Files Automatically), but instead theyplay it back as well.▪ To load the Sample, press the Control encoder or Button 8 (LOAD).When you disable Prehear, the playback of any Sample still being pre-listened is stopped.The Prehear signal is sent to the Cue bus of MASCHINE. For more information on theCue bus, see section ↑9.2.6, Using the Cue Bus.3.3.3 Loading Groups with their PatternsEvery Group from the factory library includes a set of Patterns that illustrate possible uses ofthat Group. Similarly, when you save a Group of your own to the Library for later use, all Pat-terns you have created for that Group will be saved with the Group.BrowserAdditional Browsing ToolsMASCHINE - Manual - 132
