The MULTI option (Button 8) switches between single and multiple selection:▪ When MULTI is disabled (Button 8 off):◦ Pressing the Group button / pad of an unselected Group/Sound sets the focus to thatGroup/Sound and clears the current Group/Sound selection (only the focused Group/Sound is then selected). The Group button / pad lights up.◦ Pressing the Group button / pad of a selected Group/Sound only sets the focus to thatGroup/Sound without changing the current Group/Sound selection. The Group button /pad stays fully lit.▪ When MULTI is enabled (Button 8 on):◦ Pressing the Group button / pad of an unselected Group/Sound adds it to the currentGroup/Sound selection without changing the current focus. The Group button / padlights up.◦ Pressing the Group button / pad of a selected Group/Sound unselects it unless it is thefocused Group/Sound. The Group button turns half lit; the pad turns half lit (if it con-tains a Sound) or off (if it is empty).4.2 Managing SoundsThis section describes the global editing functions available for Sounds and Sound slots.Sounds: Sound List or Pad ViewWith the exception of naming Sound slots, all procedures described in the following sectionsare available both in the Sound List and in the Pad view. The Pad view is an alternative repre-sentation of your Sound slots that puts emphasis on their relationship with the pads on yourcontroller.Managing Sounds, Groups, and Your ProjectManaging SoundsMASCHINE - Manual - 168
