Modulation PageAs with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-ity.Element DescriptionSCALE SectionVelocity Adjusts the velocity response of the drum. Available values rangefrom -100.0 % to 100.0 % (default value). At zero (mid course),the drum is played at full velocity, no matter how hard you hit thekeys (or pads). From that mid position, by turning the knob to theright you increase the positive velocity response and make the drummore and more sensitive to the velocities at which you hit the keys/pads. From the mid position, turning the knob to the left as theinverse effect: the harder you hit the key/pad, the softer theresulting drum sound will be.9.2.2 Kick – TronicFat, punchy and warm, the Tronic kick is based on another classic analog kick drum which hasprovided the backbone to countless dance and electronic records for the past 30 years. TheTronic kick takes this classic a step further with extended parameter ranges and chromaticplayability, but also adds a specially designed distortion section capable of a wide range of tex-tures, from subtly rounded to all-out gabber assault.The parameters described below are presented as they appear in the Control area (Ar-range view). The same parameters are available in the Plug-in panel within the Plug-inStrip (Mix view). See ↑8.4, The Plug-in Strip for more information on this.Main PageElement DescriptionMAIN SectionEngine Selects the engine used in the Kick Plug-in. If you change thissetting, please refer to ↑9.2, The Kicks.Using the DrumsynthsThe KicksMASCHINE 2 - Manual - 383
