7.6. Using Cue ChannelYou can use the CUE channel on the Mixer to preview and tracks in the headphones. Any Mixerchannel is equipped with a CUE button to route the audio signal into the CUE channel. The MIXand VOL knobs are used for determining the level for the CUE channel, as well as the ratio be-tween the cued signal and the master signal.Routing Audio Signals into the Cue ChannelTo route the audio signal from Mixer channels into the CUE channel:• Press any CUE button in the Mixer channel.The audio signal is audible in the CUE channel.You can route the audio signals of all Mixer channels into the CUE channel at once.Adjusting the Ratio between the Cue-Mix SignalIn the CUE channel, the MIX knob lets you determine the ratio between the cued signal and themaster signal.1. Turn the MIX knob clockwise to let the MASTER signal dominate.When you turn the MIX knob entirely clockwise, you will only hear the MASTER signal in theheadphones.2. Turn the MIX knob counter-clockwise to introduce the Mixer channel signal.When you turn the MIX knob entirely counter-clockwise, you will only hear the Mixer channelsignal in the headphones.Adjusting the Cue Channel LevelTo adjust the Cue channel level:• Turn the VOL knob clockwise or counter-clockwise to increase or to decrease the CUE chan-nel level, respectively.Tutorials49