Triggering SamplesOnce the Remix Set is loaded into the Deck you can trigger the Samples:1. Press Pad 1 - 4 to trigger the corresponding Samples.The Deck and the Samples play back and the Pads brightly light up. When a one-shot Sam-ple is triggered, the Pad lights up brightly as long as the Sample plays back.2. To stop the playback of a Sample, press and hold SHIFT to access the Decks secondaryfunctions.The colors of the first row of Pads change to white.3. While holding SHIFT, press the Pad for the corresponding Sample you want to stop play-back.The Sample stops immediately and the Pad turns dim. The Deck playback continues.Adjusting Sample Slot VolumeThe volume level of any Sample Slot can be adjusted and muted individually:To adjust the volume level of a Sample Slot:1. Press and hold the Pad below the Pad for the corresponding Sample to access the soundcontrols for the Sample Slot.The display shows the current volume and filter parameter values.2. While holding the Pad, turn the MOVE encoder clockwise or counter-wise to adjust the vol-ume for the Sample Slot.Tutorials66
