Nautel GV60 Troubleshooting Manual

Contents

Nautel GV60 Troubleshooting Manual Manual pdf 343 page image

GV60 TROUBLESHOOTING MANUAL WIRING/CONNECTOR LISTSVERSION 1.0 2018-01-01 PAGE 4.3.1SECTION 4.3: WIRING/CONNECTOR LISTSThis section contains the wiring information for the hard-wired assemblies of the transmitter, andapplicable connector mating information.Wiring Lists ProvidedWiring lists are provided in tabular format. Table 4.3.1 on page 4.3.2 lists the tables containing wiringinformation. These tables provide non-printed wiring pattern, point-to-point (source and destination)interconnection information.Wiring Lists Not ProvidedSeparate wiring lists are not provided for some assemblies, including: Assemblies that have a separate maintenance manual. Refer to the appropriate maintenancemanual for detailed wiring information for these assemblies, if provided. Assemblies that have their wiring information shown in tables on their assembly detail drawing(s).Refer to the Mechanical Drawings section of this manual for detailed wiring information for theseassemblies.Connector Mating InformationWhere applicable, a connector mating table is provided after the corresponding wiring list. Table 4.3.2on page 4.3.2 identifies all provided connector information.Wire ColoursEvery effort is made to manufacture assemblies using the wire colour shown in the Colour column ofthe wiring list tables. Sometimes, a white wire will be substituted for the listed colour. In such cases,wires must be identified by their assigned numbers.Printed Wiring Board PatternsPrinted wiring pattern information for printed wiring boards (PWBs) is beyond the scope of this manual,and therefore not provided.