Nautel XR12 Installation Manual

Also see for XR12: Troubleshooting manual Operation and maintenance manual Preinstallation manual

XR12 Installation Manual Connecting ac powerPage 5-2 Issue 3.0 2009-07-152. Connect the ac power ground to the station reference ground.3. Verify that the station reference ground and the transformer ground terminal are connectedto the safety ground stud assembly on the rear of the transmitter, (see Figure 2.2 on page 2-3and Step 3 - Step 4, page 4-1).4. Verify that the ac power conductors are connected to the power transformer as shown inSection 3, “Installing the power transformer” on page 3-1.5. Optionally, install the NAX188 MOV ac transient protection system. See the NAX188documentation for more information.