12 CONFIGURE THE GaTEway6.1 Accessing the Gateway WebConfigurator1. Navigate to the IP address of the gateway on the local PCusing one of two methods:● Open a web browser and enter the IP address of theGateway; the default Ethernet address is 192.168.1.24, thedefault wi-Fi access Point address is 192.168.50.1● If using the FieldServer Toolbox (Section 5.1.1.2), click theConnect button.Note2. Once at the web app splash page, click the Login button.Figure 13: Web App Splash Page3. Enter the previously set up or default username and password.Note The default username is “admin”. The defaultpassword is “admin”.Figure 14: Login Window4. From the web app landing page (Figure 15), click theConfigure tab.Figure 15: Web App Landing Page5. Then, click the Profiles Configuration button to go to the webConfigurator page.Figure 16: Configure Tab6. CONFIGURE THE GATEWAy
