User's manual MobileNavigator | 5Before you begin - 11 -This is how youconnect the dipoleaerial8. Insert the jack plug of the TMC dipole aerial into the TMCaerial connection on the left side of the device.9. Use the suckers to fix the aerial to the windscreen.2.2.2 Fitting the PNA on your bikeMount the fitting...1. Connect the clamp and the mounting plate . Pull theclamp round the handle bar as represented above (openingup, plate towards the driver). Do not forget to put the rubberband which is included in the delivery between the handlebar and the clamp. The clamp is flexible, so you can open itcarefully, place it round the handle bar and close it.2. Put the cradle of the device onto the mounting plate .Push the holder downwards until it snaps in noticeably. Pleasenote that there is only one correct position for the holder tobe fitted.3. Fix the complete holder kit with the included screw . Fastenthe screw only slightly for the moment.4. Insert the device into its cradle. Verify that the clip snapsnoticeably!5. Turn the holder until you may read the screen well whilesitting on the bike.6. Fasten the screw.
