Navini Networks Ripwave User Manual

Also see for Ripwave: Hardware installation and commissioning guide User manual

Navini Networks Ripwave User Manual Manual pdf 27 page image

Navini Networks, Inc. Ripwave MX Modem User GuideThe Indicator Light on theS-EBP, continuedg the-EBPforpensell shutrge state. Recharging the battery willstore it to its normal healthy state.ng the battery has no power) or is redndicating the battery level is low).o recharge the S-EBP, use only the 12V charger that came withe S-EBP. Using any other charger can damage the battery. Toharge the S-EBP, plug the 12V adapter into the 12V input socketn the S-EBP.Note: The battery may charge while it is connected to aodem.Note: Do not attempt to plug the 12V adapter into the Modems this can harm the Modem.CharginSNote1: As with any battery, when the S-EBP is left unuseda long period of time, it tends to lose its charge. When this hapand when the charge drops to approximately 5% of the full chargelevel, the red LED comes on to indicate that the battery’s charglevel is low. After a limited duration, the internal circuitry widown both the LED and the battery to prevent the battery fromgoing into a deep-dischareThe S-EBP needs to be recharged when the battery is connected toa Modem and the Modem is turned on but the LED on top of thebattery remains off (indicati(iTthcoMa27060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)