Navini Networks Ripwave User Manual

Also see for Ripwave: Hardware installation and commissioning guide User manual

Navini Networks Ripwave User Manual Manual pdf 30 page image

Navini Networks, Inc. Ripwave MX Modem User GuideCharging theHD-EBPare andaintenanceeeds to be recharg attery is connectedM ur ed on but the LED on the backof the dicating the battery has no power) oris red (indicating the battery level is low).To recharge the battery pack, use only the 12V charger that camewith the HD-EBP. Using any other charger can damage the battery.To charge the HD-EBP, plug the 12V adapter into the 12V inputsocket on the HD-EBP. Plug the other end of the adapter into anelectrical wall socket.o the Modemwhile it is connected to ayou years of trouble-free service.o ensure on, readinstructio Keep the Modem free of d isture. If th etswet, l to dry it i .Handle the Modem gently. Dropping it or mishandling it cancause damage to the plastic shell or the electronic circuitry. Keep the Modem away from high temperatures. Heat can causedamage to the plastic shell or the electronic circuitry.CMThe HD-EBP n ed when the bto a odem and the Modem is tbattery remains off (innPig-tailNote: Do not attempt to plug the 12V adapter intas this may harm the Modem.Note: The battery may chargeModem.our Modem is designed to giveYT operatins.the following care and maintenanceust and momm telye gModemuse a towe ediaCord12V Input SocketPlugs intoWall Socket30060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)