Navman M-Nav 750 User Manual
                                                        | |
Contents
| 
M-Nav 750 | User Manual103 Install the M-Nav 750 in a VehicleNote: These installation instructions assume that the Qube tracking device is already installed inthe vehicle and that the RJ-45 cable has been fed through the dashboard, ready for connection tothe M-Nav 750.When you have assembled the docking cradle, you can either:• use the suction mount to attach the M-Nav 750 to the vehicle windscreen, or• use the optional hard installation kit to attach the M-Nav 750 to a hard surface, such as thetop of the dashboard3.1 Assemble the Docking CradleConnect the suction mount to the cradle fixture, as shown, to form the docking cradle.3.2 Windscreen InstallationNote: Some windscreens contain areas of tinted glass that may interfere with the GPS signal. Donot mount the M-Nav 750 in these areas.Read the Important Safety Information in Section 1.1.Decide where to locate the suction mount on the windscreen. Use the alcohol swab to thoroughlyclean that area of the windscreen, then dry the area with a soft, lint-free cloth.Press the suction cup (part of the docking cradle) fi rmly against the windscreen for 3 seconds.Push the lever down to vacuum-seal the suction cup to the windscreen.Now you are ready to add the M-Nav 750 to the docking cradle. See Section 3.3.1. Connect the suctionmount to the dockingcradle here.2. Slide the suctionmount to the right sothat it clicks into placeunder this clip. |
Related manuals for Navman M-Nav 750
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine