M-Nav 750 | User Manual18This example shows a Route-to message. Route-tomessages have two extra option buttons:• Go to exit from the Message option and navigate to thenew location (see Section 5.8).• Show to exit from the Message option and display thenew location on the map (see Section 5.8).Note: If you want to reply to the message, do this first,before you touch Go or Show.5.3 Read a Stored MessageA stored message can be a new message that you have not yet read, or an old message that youhave not deleted.To read a stored message at any time, press the Hot Buttonon the top of the M-Nav 750 to display the ‘Main Menu’.The number of unread stored messages is shown in the topleft corner of the screen. In this example there are 3 unreadmessages.Touch Messages.The ‘Received Messages’ screen lists all your storedmessages. The most recent message is at top of the list, withthe time that it was received by your M-Nav 750.Touch the up-arrow or down-arrow to move up or down themessage list, if necessary.Touch the stored message that you want to read. It isdisplayed immediately, along with any previous replies. If youcannot see all of the messages, move the scroll bar on the farright hand side of the screen.New and Unread.Read.Read and Replied.Note: The M-Nav 750 will display a maximum of 30 replies to any stored message.