5How do I get started?To get started for the first time, complete the following steps:1. Read the Important Safety Information2. Position your Navman in your vehicleFollow the instructions in the Quick Start Guide.CAUTION: Ensure that your Navman does not obstruct the driver's view, or interfere with theoperation of the vehicle airbags and safety devices.3. Turn your Navman onYour Navman will turn on and display the Language screen.4. Select your preferred languageFrom the Select Language screen, tap your preferred language. You can change your preferred language while using your Navman.5. Read the warning messageThe Safety Agreement screen will display after you have selected your preferred language. Read the SafetyAgreement message. To confirm that you have read and understood the message, tap Accept.6. View the Tutorial To move forward through the Tutorial screen, tap Next. To view the previous screen, tap . To skip the Tutorial screen, tap Skip.To prevent the Tutorial from displaying on each start-up, tap the Show tutorial on start-up option todeselect it. To enable the tutorial again, select the option from Main Menu Æ Æ Help Æ ViewTutorial.7. Customise the deviceFollow the onscreen instructions to select your preferred distance unit, date format, time format, and mapset.You will have to do this only the first time you use your Navman. You can change these settings whileusing the device by tapping Main Menu Æ . For more information, refer to the “What can Icustomise?” section.8. Set up HomeThe Home setup wizard only appears on the first time you start your Navman. Tap OK to set up your home immediately using the address-entry wizard. You can tap Cancel to skip the wizard, and then select you home later in MY PLACES.When you have finished the steps above, the Main Menu screen will display. If you have a GPS fix, you can startto use Navman to plan your trip.The first time you use your Navman it may take several minutes to establish a GPS connection.
