Navman Qube 2.5 Installation Manual

Contents

Navman Qube 2.5 Installation Manual Manual pdf 9 page image

Qube 2.5 | Installation Manual1118-Wire cable Function DescriptionYellow Multi IO-1 Digital input, analogue input, digital outputGreen Multi IO-2 Digital input, analogue input, digital outputBlue Multi IO-3 Digital input, analogue input, digital outputGray Multi IO-4 Digital input, analogue input, digital outputBlack A – GND Analogue GND referenceWhite +5V Reference voltage if requiredOrange IN1 Digital inputPink IN2 Digital inputRed IN3 Digital inputBlue/White IN4 Digital inputBrown RXD1 Serial RX – Used for ConEX capture or EMS (Qube input)Purple TXD1 Serial TX – Used for ConEX capture or EMS (Qube output)Black/White CTS1 Serial CTS - Used for ConEx Capture or EMS (Qube input)Light Green RTS1 Serial RTS - Used for ConEx Capture or EMS (Qube output)Brown/White RS485 RS485ARed/White RS485 RS485BRJ45 Connector – (Female socket)18-Wire cable Function DescriptionPin – 1 GND GroundPin – 2 +12/24V PowerPin – 4 Serial RxD Serial data inputPin – 5 Serial TxD Serial data output5.3 Digital InputsThese are inputs that are either on or off. Thepolarity is not important but must be noted for thecorrect configuration to be sent to the vehicle. Alldigital inputs must be sourcing inputs.ConEX ConEXConEXConEXQube 2.5 Installation Manual.indd 11Qube 2.5 Installation Manual.indd 11 7/8/08 12:09:00 PM7/8/08 12:09:00 PM