Naxa NCD-694 Instruction Manual

Also see for NCD-694: User manual

Contents

Naxa NCD-694 Instruction Manual Manual pdf 8 page image

1.7 Description of the Rear CabinetConnecting the parking brake line to the parking brake system built in the carParking brakeParking brake switch(inside the car)To metallic body or chassis of the carThe Description of the Fixed ISO Female ConnectorCONNECTOR A1.2.3.4. Memory +12V(yellow)5. Auto Antenna(blue)6.7. 12V (To Ignition Key)(red)8. GROUND(black)CONNECTOR B1. Rear Right Speaker (+)2. Rear Right Speaker (-)3. Front Right Speaker (+)4. Front Right Speaker (-)5. Front Left Speaker (+)6. Front Left Speaker (-)7. Rear Left Speaker (+)8. Rear Left Speaker (-)Reversal line WhiteParking Line GREENFixing Screw BoltFixed ISO Female ConnectorGRAYGRAYVIDEO OUTYELLOWYELLOWBLACK RED RWHITE LBLACKRCA LINE OUTSUBWOOFERGREY GREENBT AntennaNot e:1. Parking w ire must be connec ted, and the parkin g brake must be e ngag ed in ord er fo r the monitor t o wo rk2. Use the c lip en d of the G rou nd wire provid ed by manufacture r to conne ct Mount ing S crew, us e the othe rend of the Gro und wire to co nnect the negative pole of th e power source. O therwise, the video on screenmay flaches.Parking brake wires(Green)6. BLUETOOTH HANDFREE SYSTEM(Option)1. Pairing and connection1) Turn on the Bluetooth mode of the mobile phone;3) For some mobile phones, they can automatically connect with the BT device of thecar audio system after pairing is ok; for some mobile phones, they need to select thepaired BT device and press the CONNECTION button . When connection is ok, theLCD of the car audio system will show LINK OK.* when pairing is failed, long press the MODE button on the front panel or PAIR buttonon the remote control to enter pairing mode, then the LCD will display PAIR STAR,then pair and connect with mobile phone again.*2.In the connection status, find the paired and connected Bluetooth Device, then pressthe disconnection button to disconnect.In the disconnection status, find the paired and disconnected Bluetooth Device, thenpress the connection button to connect.3. In the connection status: Mobile phone transfers to the car audio whenever a diallingtakes place; Mobile phone transfers to the car audio whenever receiving a call.4. Dialling when in connection status4.1 Dial with the mobile phone directly.4.2 Dial with remote control with the following procedures:(1) Short press TEL button, then a line will appear on LCD.(2) Input telephone number with number buttons 0-9* Short press CLEAR button to cancel the wrongly input number if necessary(3) Short press TEL to execute the dialling.2) Select the item of Finding the BLUETOOTH Device and press enter. Once the deviceand unit are paired, the unit will display the name of the device. Select the device andpress enter, and the unit will ask for a password which is 0000. After entering 0000,press enter and after the pairing is complete the unit will display "Pairing is OK".In Disc mode, press and hold the PAIR button for 3 seconds to enter Pairing mode.Using the mobile phone for connecting and disconnecting.PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com