Necta Colibri Installation, Use And Maintenance Handbook

Also see for Colibri: Service manual Instructions for installation, use and maintenance manual Installation - use - maintenance

Necta Colibri Installation, Use And Maintenance Handbook Manual pdf 11 page image

7© by NECTA VENDING SOLUTIONS SpA 01-2003 197 00- in order to remove the impellers, block the disk fittedon the mixer shaft with a finger (see Fig. 4);MIXER CLEANINGThe mixer must cleaned daily and every time the machineis refilled to prevent clogging of the mixer if any product isaccidentally spilled during refilling.It must be cleaned also after the mixer sanitising opera-tions, as described in the relevant chapter.The mixer is cleaned with the door closed, doing asfollows:- press button 8 for 2 secondsThe display will show the request to enter the pass-word;- press in a quick succession buttons 4 4 8 8 to startcleaning.- wash all parts with detergent being sure that all visibleresidue and product layers are mechanically removed,using a brush if necessary;Disinfection should be carried out using chlorine-baseddetergents.- soak all components for approx. 20 minutes in acontainer filled with the previously prepared chlorine-based detergent;- reinstall the feeders and the water funnels;- reinstall the powder deposit drawers and the powderfunnels after thoroughly drying them.After reinstalling all parts the following is howeverrequired:- add a few drops of the chlorine-based detergent in themixer;- using the mixer cleaning function with the door closed,thoroughly rinse all components to ensure that allresidue of the detergent solution is removed.CLEANING THE WATER SUPPLY TANK(O PTIONAL )For machines equipped with a water tank inside thesupport cabinet, such tank must be sanitised at least oncea week with the chlorine-based detergent used for themixers.Fig. 4