Necta KIKKO ES6 Installation, Use And Maintenance Manual

Necta KIKKO ES6 Installation, Use And Maintenance Manual Manual pdf 6 page image

2© by NECTA VENDING SOLUTIONS SpA 02-2004 184 02INTRODUCTIONThis technical documentation is part and parcel of thevending machine and must always follow the machinein case it is moved or transfer of ownership, so as toallow consultation by different operators.Before starting installation and using the machine, it is firstnecessary to carefully read and understand the instruc-tions contained in this manual, as they offer importantinformation on installation safety, operating instructionsand maintenance.This manual is divided into three chapters.The first chapter describes the loading and routine main-tenance operations which are carried out in areas of themachine accessible with simple use of the door key,without using any other tools.The second chapter contains the instructions for correctinstallation and all information necessary for optimum useof the machine.The third chapter describes maintenance operationswhich involve the use of tools to access potentially danger-ous areas.The operations described in the second and thirdchapters must be carried out only by personnel whohave the specific knowledge of the machine function-ing from a point of view of electrical safety and healthregulations.IDENTIFICATION OF THE VENDINGMACHINE AND ITS CHARACTERISTICSEach machine is identified by its own serial number,indicated on the rating plate attached inside the cabinet onthe right side.This plate is the only one acknowledged by the manufac-turer as identification of the machine, and carries all datawhich readily and safely gives technical information sup-plied by the manufacturer. It also assists in the spare partsmanagement.IN THE EVENT OF FAILURESIn most cases, any technical problems are corrected bysmall repair operations; however, before contacting themanufacturer we recommend that this manual be readcarefully.Should there be serious failures or malfunctions, thencontact the following:NECTA VENDING SOLUTIONS SpAVia Roma 2424030 ValbremboItaly - Tel. +39 035606111TRANSPORT AND STORAGETo prevent any damage, special care should be takenwhen loading or unloading the vending machine.The machine can be lifted by a motor-driven or manualforklift truck, and the forks are to be placed underneath themachine from the side clearly indicated by the symbol onthe cardboard package.Do not:- overturn the vending machine;- drag the vending machine with ropes or similar;- lift the vending machine by its sides;- lift the vending machine with slings or ropes;- shake or jolt the vending machine and its packing.The machine should be stored in a dry room where thetemperature remains between 0°C and 40°C.Avoid stacking machines one on top of the other andalways keep it upright as indicated by the arrows on thepacking.Water mainscharacteristicsAbsorbed powerOperating voltageModelProduct codeBoiler dataCurrentFrequencySerial numberTypeFig. 1