Necta brio 3 Programming Manual

Contents

Necta brio 3 Programming Manual Manual pdf 4 page image

P2595EN01 08 - 2007Bmessages for the userThe following table indicates the most common strings that may be shown on the machine display in normalvending mode.String DescriptionHEATINGIt is not possible to make selections. The boiler heating element isswitched on and is heating the water to bring it to normal operat-ing temperature.SELECT THE DRINK The machine waits for the user to make a drink selection by press-ing the relevant selection button.NO CHANGE The machine signals that, in the event the money in the tubes islower than the required minimum, the change is not guaranteed.DRINK SELECTED / (SCROLLING BAR) The machine is preparing the selected drink.DRINK SELECTED / TAKE THE PRODUCT The machine has completed the preparation of the selected drink.VENDING MACHINE OUT OF ORDER It is not possible to make selections. Besides this message, thefailure that caused this condition is displayed alternating.SUSPENDED SERVICEIt is not possible to make selections. This condition occurs whenthe machine is in Energy Saving mode or while dispensing a prod-uct from the slave machine.ESPRESSO OUT OF ORDERIt is not possible to make espresso coffee based selections,because of a failure in the coffee unit. All other selections remainavailable.SELECTION DISABLED It is not possible to make the selection chosen, as such selectionwas disabled in the programming menus.EMPTY GROUNDS TRAYThe maximum number of coffee based selections has beenreached and the machine signals that the coffee grounds tray isfull and must be emptied with the machine on, to allow the soft-ware to recognise the operation.INSERT TRAY The machine signals that the specific sensor does not detect thepresence of the coffee grounds tray.