Necta brio 3 Programming Manual

Contents

Necta brio 3 Programming Manual Manual pdf 5 page image

P2595EN01 08 - 2007ProgrammIng menuIn order to access the programming menu, open the front door of the vending machine, switch on the machineand insert the yellow key supplied in the relevant slot located on the left-hand side of the machine.Press the programming access button as shown in the figure:The machine goes into "Filler Menu" mode.The buttons shown in the figure are used for surfing through the different menus:Scrolling buttons UP “�”and DOWN “�”The UP and DOWN scrolling buttons are used for moving from one programming menu item to the next one,located in the same level, and at the same time change the status or the numeric value of the correspondingfunctions.Confirm / Enter button “�”The confirm / enter button is used for moving to the lower level or for confirming a value after being entered orchanged.Exit button “�”The exit button is used for returning to the higher level or for exiting a change field of a function. When reach-ing the highest level in the menu, this button is pressed for going from the Technician menu into the Filler menuand vice versa..C