Nemco 9100 Installation And Operating Instructions Manual
           | |
Page | 5P: 419.542.7751 F: 419.5426690 800.782.761 nemcofoodequip.comOperating Instructions1. Plug the unit in to the appropriate power outlet. The display will show a single red dotwhen voltage is present.2. Press the round power on/off button. The display will show ‘0’ and the unit is now inthe ready state.3. Place an appropriate pan on the glass cooktop, centering it on the target.4. Press the Power Up ‘ʌ’ button. The display will show ‘5’, and the fan will start. Therange is now warming or cooking at power level 5.5. Press the Power UP ‘ʌ’ button to increase the power setting.6. Press the Power Down button ‘v’ to decrease the power level.7. Warming Units:(9100-1, 9100): The power will adjust from 1 to 7. See chart for approximate holdingtemperatures.Cooking units:9110, the power will adjust from 1 to 9.9110-1, the power will adjust from 1 to 8.9111-1, the power will adjust from 1 to 9.8. While cooking or warming, press the Power On/Off button to stop the cooking cycle, orremove the pan.If the pan is removed and replaced within approximately 40 seconds while the ’U’symbol is flashing on the display, the system will automatically resume heating at theprevious setting. After 40 seconds with no pan, the display will show ‘0’. Pressing thePower Up key once will resume operation at the previous setting if the pan is present.9. The power level can be adjusted ‘on the fly’ at any time while the unit is heating.10. When the unit is turned off using the Power On/Off button, the cooling fan maycontinue to operate for a short period of time. |
manualsdatabase
Your AI-powered manual search engine