Hangzhou NeoDen Technology Co.,Ltd.182.1.5 Feeders setting pageSee figure (2.1.5) feeders setting pageFunction: all components’ setting on this files list, like: nozzle selecting, stack setting, thelocation of pick components, adjustment setting, and others components’ setting all need befinished here.Figure (2.1.5)2.1.5.1 Feeder arrangementThe first thing you see on the top and bottom of the page and on the left is the stack number, onthe top page is 33-64 stacks, on the down page is 1-39 stacks and 65-74 stacks is IC tray, this isthe idea configuration, the number of stacks will be decreased based on actual feeders’ widthwhich you choose, For instance, there have many components’ information on the componentslist, choose a stack at will, there is a pull down menu, click it , it will appear all components’information and specification on the stack list, Selecting a drop-down list will result in one lessitem, every stack can be operated like this.2.1.5.2Feeder information configurationChoose a stack, click the “apply” in the top left corner, this stack’s configuration function is tounlocked , then the information can be modified, there are 5 contents on thispage ,respectively are: the information of nozzles, the information of feeders , the basicinformation of stack, the information of IC tray and the stack exchange, one of IC tray andfeeders’ options will at closing state according to the different of stack. The operation order ofthese setting is: the information of feeders (IC tray) → the basic information of stack → theinformation of nozzles, exchange stack need to base on the actual situation, if find installingthe tape reel wrongly, use exchange stack.● the information of IC tray