Ness 101-091 Installation & User Manual
                  | |
13WIEGAND READER MODEThe XK Series device can work as Standard Wiegand Reader, connected to the third party Controller--- 7 3 #To set as Wiegand Reader Mode, programming option 73# must be seleted.Notes:It will read EM format 125 Khz Cards.Connection DiagramNotes: When set into Wiegand Reader mode, nearly all settings in Controller Model will becomeinvalid. And Brown & Yellow wires will be redefined as below:-Brown wire: Green LED light control-Yellow wire: Buzeer control If you need to connect Brown/Yellow wires:When the input voltage for LED is low, (i.e. Connected to 0V), the LED will turn to Green; and when the inputvoltage for Buzzer is low, (i.e. Connected to 0V), it will sound.Set Wiegand Output FormatsPlease set the Wiegand output formats of Reader according to the Wiegand intput formats of the Controller.Programming Step Keystroke Combination1. Enter Program Mode * (Master Code) #2. Wiegand output bitsPIN output bits8 (26~37) # (factory default is 26bits)8 (4 or 8 or 10) # (Factory default is 4bits)(Pre-Set in the factory after a ‘Factory default’ is10 Bit Output format)3. Exit * |
Related manuals for Ness 101-091
manualsdatabase
Your AI-powered manual search engine