Net Media SCM1 Specifications
Also see for SCM1: Troubleshooting tips
    | |
MAN-MODLAMP REV0708ANM-MODLAMPNetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.comModulated CameraIndoor/Outdoor Weather ResistantNM-MODLAMP(SCM1 SCM2 SCM3)Elbow BracketAdjusts camera angle at base,screw, and housing. Installs in1/2” junction box covers.Camera LensComes prefocused fromfactory but can be adjustedby rotating in either direction.Camera BracketSlot indicates image bottom.Use slot to pull bracket outand remove Modulator.HousingAvailable in Ivory only:Model Camera TypeBase, Gasket & ScrewsMount to round 4” junction box.Housing CapRemove to access Camera Lens,Camera Bracket, and Modulator.Locking RingSecures elbow bracket tobase at desired position.(SCM1) NM-MODLAMP-BI(SCM2) NM-MODLAMP-CI(SCM3) NM-MODLAMP-HIB&WColorDay/Night ColorVideo/Power ConnectorPower and video share one coaxthrough female F connector.ModulatorNot Shown - Behind Camera Bracket.Switch bank sets output channel:UHF 14-69 or CABLE 70-94, 100-125.Power InjectorConnects power transformer to coaxfor One Wire Video™ installation.Modulator built into cameraOne Wire Video™ installationCombines with existing TV channelsViewable on multiple televisionsExcellent image qualityTough aluminum housingWeather resistant enclosureInternally routed cablesMounts to standard electrical fixturesMounts directly to walls and ceilingsWorks in low light conditionsAdjustable camera anglesTamper resistant wiringIncludes power supply and power injector1 year limited warrantyCamera Lens:Image Sensor:Resolution:Field of View:Min Illumination:Infrared Sensitivity:Modulation Method:Output Channel:Output Level:Output Connector:Cable Type:Power Requirement:Power Connector:Housing Size:Base Size:Mounting Holes:Weight:Digital Crystal PLLUHF 14-69, CABLE 70-94, 100-125+30dBmVFemale F, 75 OhmRG59, RG6 or better12V DC, 300mA5.5mm OD, 2.1mm ID, center positive2.13“ dia. x 3” long4.5” dia., .75” high, 1/2“ hole3.5” centers1 lb. (subject to change without notice)FEATURESProduct Includes:1. Camera Assembly (Camera, Modulator, Housing, Housing Cap, Elbow Bracket, LockingRing, Base, Gasket, Video/Power Connector).2. Power Injector and 12V DC 300mA Power Transformer (Center Conductor Positive).3. Mounting hardware (Mounting Screws, Grounding Strap, and Screw).3.6mm1/3” CCD350 lines72˚ Horizontal0.7 Lux F2.0Yes3.7mm1/4” CCD470 lines54˚ Horizontal0.5 Lux F1.2NoThe NetMedia MODLAMP (SCM1, SCM2, SCM3) self contained camera and modulator converts its video signal to a selectedtelevision channel. It is powered over the same coax cable that returns the video broadcast signal for One Wire Video™installation. It mounts to a typical round 4 inch junction box and is viewed with a television tuner. Other junction boxes fromyour local hardware store may also be used after replacing the round base with another that has a 1/2 inch diameter holefor the elbow bracket. Equipment that does not have a tuner, such as a security monitor, Quad display, or DVR, will require ademodulator (any TV tuner device with a composite video output such as a VCR) to convert the video for its use.SPECIFICATIONS B/W Color Day/Night Color3.6mm1/3” CCD580 lines72˚ Horizontal0.3 Lux F1.2YesB/W Color Day/NightColor |
Related manuals for Net Media SCM1
manualsdatabase
Your AI-powered manual search engine