NTC 3000 Series – M2M Serial Modem48 www.netcommwireless.comTechnical DataThe following table lists the hardware specifications of the NTC-3000 Series devices.MODEL NETCOMM NTC-3000 SERIESModem Chipset/ModuleSierra Wireless AirPrime SL8080T (NTC-3000-01)Sierra Wireless AirPrime SL8082T (NTC-3000-02)Sierra Wireless AirPrime SL8084T (NTC-3000-03)UMTS bandsUMTS 850/1900 (NTC-3000-01)UMTS 900/2100 (NTC-3000-02)UMTS 850/2100 (NTC-3000-03)GSM bands Quad-band EDGE/GPRS/GSM 850/900/1800/1900MHzMaximum Data Throughput / 3G RadiointerfacePeak download rate: 3.6 MbpsPeak upload rate: 384 KbpsMaximum Data Throughput / Serial RS232interface Auto baud rate - 115,200 / 57,600 / 38,400 / 19,200 / 9,600 /4,800 / 2,400 bpsConnectivity 1x RJ-45 port (incl. DB9 adapter) for serial RS-232 connections1x Mini USB console port (Windows driver available)SIM Card Reader Lockable tray, supports standard USIM/SIMAntenna connector 1x SMALED Indicators Power, 3G StatusOperating Temperature Normal: -40 ~ 85 °CPower input 5 ~ 36 V DC via RJ-45 portDimensions & Weight 74 x 57 x 24 mm / 84g (w/o mounting bracket and antenna)Regulatory Compliancy A-Tick, CE (NTC-3000-02)A-Tick, CE (NTC-3000-03)Table 6 ‐ Technical Specifications for the NTC‐3000 SeriesMini USB ConnectorThe mini USB connector provides a USB based virtual COM port to facilitate communications to the NTC-3000 series in the event that a COM port fails. This is achieved through theuse of an SWI driver and an accompanying “3G Watcher” application. The connector uses a standard mini USB pin out configuration.Pin: 1 5Figure 38 ‐ The Mini USB ConnectorPIN SIGNAL1 VIN2 D-3 D+4 N/C5 GNDTable 7 ‐ Mini USB Connector Pin Outs