4-26 Firmware User GuideNAT AssociationsConfiguration of map and server lists alone is not sufficient to enable NAT for a WAN connection because mapand server lists must be linked to a profile that controls the WAN interface. This can be a Connection Profile, aWAN Ethernet interface, a default profile, or a default answer profile. Once you have configured your map andserver lists, you may want to reassign them to different interface-controlling profiles, for example, ConnectionProfiles. To permit easy access to this IP Setup functionality, you can use the NAT Associations screen.You access the NAT Associations screen from the Network Address Translation screen.Select NAT Associations and press Return. The NAT Associations screen appears.• You can toggle NAT? On or Off for each Profile/Interface name. You do this by navigating to the NAT? fieldassociated with each profile using the arrow keys. Toggle NAT on or off by using the Tab key.• You can reassign any of your map lists or server lists to any of the Profile/Interfaces. You do this bynavigating to the Map List Name or Server List Name field associated with each profile using the arrowkeys. Select the item by pressing Return to display a pop-up menu of all of your configured lists.MainMenuSystemConfigurationNetwork AddressTranslation (NAT)NAT AssociationsProfile/Interface Name-------------Nat?-Map List Name-----Server List NameDefault Answer Profile On my_first_map my_serversEasy Setup Profile On Easy-PAT my_serversProfile 01 On my_second_map my_serversProfile 02 On my_first_map my_server_listProfile 03 On <> <>
