Netopia 3346-ENT Getting Started Manual

Also see for 3346-ENT: Specification sheet Specifications Frequently asked questions Getting started guide Quick start guide

Netopia 3346-ENT Getting Started Manual Manual pdf 28 page image

6-4 Getting Started Guide1. DSL Line Configuration1. Select Trellis Coding Enabled. Toggle it to On (the default) or Off. Unless otherwise specified by yourprovider, you can accept this default.2. Select Fast Retrain Enabled. Toggle it to On (the default) or Off. Unless otherwise specified by yourprovider, you can accept this default.3. The Wiring Type pop-up menu allows you to choose the type of copper pair wiring in use at your location.Tip/Ring (Inner Pair) is the most common type, and you can usually leave this default. If there is a problemconnecting, you can select AutoSense and the Router will attempt to detect the type and adjust itselfaccordingly. If you want to set it yourself, and you know that you have the reversed inner/outer pair type ofwiring, choose A/A1 (Outer Pair) from the pop-up menu.4. Select Data Link Encapsulation and from the pop-up menu choose either RFC1483 (the default) or PPP.• If you selected RFC1483, the next pop-up menu RFC1483 Mode offers the choice of Bridged 1483 orRouted 1483. If you select Bridged 1483, a new option PPP over Ethernet (PPPoE) appears. You canthen toggle PPPoE On or Off. Choosing Routed 1483 hides the PPPoE option.• If you selected PPP, the next pop-up menu PPP Mode offers the choice of VC Multiplexed or LLC SNAP.5. The next two fields, Data Circuit VPI and Data Circuit VCI are editable. Enter the Virtual Path Identifier andVirtual Channel Identifier values that your provider specifies. VPI 8/VCI 35 are the most common. Yourprovider must specify these values.6. Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.ADSL Line ConfigurationTrellis Coding Enabled: OnFast Retrain Enabled: OnWiring Type... Tip/Ring (Inner Pair)Data Link Encapsulation... RFC1483RFC1483 Mode... Bridged 1483PPP over Ethernet (PPPoE): OffData Circuit VPI (0-255): 8Data Circuit VCI (32-65535): 35PREVIOUS SCREEN NEXT SCREEN