Security 13-13The procedure for creating and maintaining filter sets is as follows:1. Add a new filter set.2. Create the filters for the new filter set.3. View, change, or delete individual filters and filter sets.The following sections explain how to execute these steps.AAAAddddddddiiiinnnngggg aaaa ffffiiiilllltttteeeerrrr sssseeeettttYou can create up to 255 filter rules. You can use them in any combination of input or output in up to eight filtersets.To add a new filter set, select Add Filter Set in the Filter Sets screen and press Return. The Add Filter Setscreen appears.NNNNaaaammmmiiiinnnngggg aaaa nnnneeeewwww ffffiiiilllltttteeeerrrr sssseeeettttAll new filter sets have a default name. The first filter set you add will be called Filter Set 1, the next filter will beFilter Set 2, and so on.To give a new filter set a different name, select Filter Set Name and enter a new name for the filter set.To save the filter set, select ADD FILTER SET. The saved filter set is empty (contains no filters), but you canreturn to it later to add filters (see “Modifying filter sets” on page 13-19). Or you can add filters to your new setbefore saving it (see “Adding filters to a filter set” on page 13-14).To leave the Add Filter Set screen without saving the new filter set select CANCEL. You are returned to the FilterSets screen.Add Filter Set...Filter Set Name: Filter Set 1ADD FILTER SET CANCELConfigure the Filter Set name and its associated Filters.
