8-10 User’s Reference GuideNote: The Congestion Management Enabled field will only appear if Standard or Buffered is selected asthe option from the Tx Injection Management field.4. Select Maximum Tx Frame Size and press Return. The default is automatically set to a value suitable forencapsulating a full Ethernet packet’s transmission load; however you can change the Maximum FrameSize to suit your network’s transmission load. Press Return.You are now finished configuring the Frame Relay Configuration screen. Press the Escape key to return to theWAN Configuration screen. If you need to configure your DLCIs, go to the next section.FFFFrrrraaaammmmeeee RRRReeeellllaaaayyyy DDDDLLLLCCCCIIII ccccoooonnnnffffiiiigggguuuurrrraaaattttiiiioooonnnnIf you selected None as your LMI Type then you will need to manually configure your DLCIs.A Frame Relay DLCI is a set of parameters that tells the Netopia Router how to initially connect to a remotedestination.The Netopia Router supports up to 16 different Frame Relay DLCI profiles.Each Frame Relay DLCI configuration you set up allows the Netopia Router to connect your network to anothernetwork that uses IP or IPX over Frame Relay.To go to the Frame Relay DLCI configuration screen, select Frame Relay DLCI Configuration in the WANConfiguration screen.DDDDiiiissssppppllllaaaayyyyiiiinnnngggg aaaa FFFFrrrraaaammmmeeee RRRReeeellllaaaayyyy DDDDLLLLCCCCIIII ccccoooonnnnffffiiiigggguuuurrrraaaattttiiiioooonnnn ttttaaaabbbblllleeeeTo display a view-only table of the Frame Relay DLCIs, select Display/Change DLCIs in the Frame Relay DLCIConfiguration screen, and press Return.The Frame Relay DLCI Configuration table is a handy way to quickly view the DLCI names and DLCI numbers thatyou attribute to your Frame Relay profiles.Frame Relay DLCI ConfigurationDisplay/Change DLCIs...Add DLCI...Delete DLCI...Add, delete, and modify DLCIs from here.
