Netzerotools XG Series Owner's Manual
                                             | |
Contents
| 
INTRODUCTIONThank you for purchasing this model by Generac Power Systems,Inc. This model is a compact, high performance, air-cooled,engine driven generator designed to supply electrical power tooperate electrical loads where no utility power is available or inplace of utility due to a power outage.READ THIS MANUAL THOROUGHLYIf any portion of this manual is not understood, contact thenearest Authorized Dealer for starting, operating and servicingprocedures.The operator is responsible for proper and safe use of theequipment. We strongly recommend that the operator read thismanual and thoroughly understand all instructions before using theequipment. We also strongly recommend instructing other users toproperly start and operate the unit. This prepares them if they needto operate the equipment in an emergency.The generator can operate safely, efficiently and reliably only if itis properly located, operated and maintained. Before operating orservicing the generator:Become familiar with and strictly adhere to all local, state andnational codes and regulations.Study all safety warnings in this manual and on the productcarefully.Become familiar with this manual and the unit before use.The manufacturer cannot anticipate every possible circumstancethat might involve a hazard. The warnings in this manual, and ontags and decals affixed to the unit are, therefore, not all inclusive.If using a procedure, work method or operating technique that themanufacturer does not specifically recommend, ensure that it issafe for others. Also make sure the procedure, work method oroperating technique utilized does not render the generator unsafe.THE INFORMATION CONTAINED HEREIN WAS BASED ONMACHINES IN PRODUCTION AT THE TIME OF PUBLICATION.GENERAC RESERVES THE RIGHT TO MODIFY THIS MANUAL ATANY TIME.SAFETY RULESThroughout this publication, and on tags and decals affixed to thegenerator, DANGER, WARNING, CAUTION and NOTE blocks areused to alert personnel to special instructions about a particularoperation that may be hazardous if performed incorrectly orcarelessly. Observe them carefully. Their definitions are asfollows:INDICATES A HAZARDOUS SITUATION OR ACTION WHICH, IFNOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY.Indicates a hazardous situation or action which, if notavoided, could result in death or serious injury.Indicates a hazardous situation or action which, if notavoided, could result in minor or moderate injury.NOTE:Notes contain additional information important to a procedureand will be found within the regular text body of this manual.These safety warnings cannot eliminate the hazards that theyindicate. Common sense and strict compliance with the specialinstructions while performing the action or service are essential topreventing accidents.Four commonly used safety symbols accompany the DANGER,WARNING and CAUTION blocks. The type of information eachindicates is as follows:nThis symbol points out important safetyinformation that, if not followed, couldendanger personal safety and/or property ofothers.This symbol points out potential explosionhazard.This symbol points out potential fire hazard.This symbol points out potential electricalshock hazard.GENERAL HAZARDSNever operate in an enclosed area or indoors.For safety reasons, the manufacturer recommends that themaintenance of this equipment is carried out by an AuthorizedDealer. Inspect the generator regularly, and contact the nearestAuthorized Dealer for parts needing repair or replacement.Operate generator only on level surfaces and where it will not beexposed to excessive moisture, dirt, dust or corrosive vapors.Keep hands, feet, clothing, etc., away from drive belts, fans,and other moving parts. Never remove any fan guard or shieldwhile the unit is operating.Certain parts of the generator get extremely hot duringoperation. Keep clear of the generator until it has cooled toavoid severe burns.Do NOT operate generator in the rain.Do not alter the construction of the generator or changecontrols which might create an unsafe operating condition.Never start or stop the unit with electrical loads connectedto receptacles AND with connected devices turned ON. Startthe engine and let it stabilize before connecting electricalloads. Disconnect all electrical loads before shutting down thegenerator.Do not insert objects through unit’s cooling slots.When working on this equipment, remain alert at all times.Never work on the equipment when physically or mentallyfatigued.1IntroductionNetzerotools.comNetzerotools.com |
manualsdatabase
Your AI-powered manual search engine