Shanghai New Rock Technologies Inc. Page46/75Table 2-18 Configuration parameter of call recordName DescriptionCDR Server Set the IP address and port number of server for storing call records.Note: If port number is not configured, the default port number 1809 willbe used.Filter Select what calls are not recorded: None or Internal calls.2.6.6 Functional keysThe function key consists of system function key and service function key. The system function keyis used for acquiring OM information, and the later is used for users to activate, inactivate extensionfeatures.After login, click the label of “System> Functional Keys” to open this interface.The following are the examples of the dialing rule for the function key:a) Using *xx (dial * and 2 digits number ) to activate a service;b) Using #xx (dial # and 2 digits number) to cancel a service.Illustrate with following defaults of various parameters, which may be modified according torequirements.Figure 2-21 Functional keys configuration interfaceTable 2-19 The use of feature codesSystem CodesInquiry of IP address Pick up the phone on any extension + ##Inquiry of extension number Pick up the phone of the extension + #00Making Recording of Voice filesStart recording Pick up the phone of any extension + *81 + hang up afterrecordingReplay Pick up the phone + *82
