Shanghai New Rock Technologies Inc. Page68/75Figure 2-36 Interface of debugging log managementTable 2-35 Configuration parameters of debugging log managementTitle ExplanationLog download See the description below.System log server Set the IP address of system log server.Log server IP address of debugging log server.Log level Select the log file level of OM, default is 3. The setting range is 1 ~ 5,the higher the level goes, the more details the log file will be.Note: log level should be set to be 3 or lower when OM is used innormal operation, avoiding influencing the system performance.Procedure of downloading the debugging log:Step 1: Click “download”, the OM starts pack the logs.Step 2: After few seconds, the interface of log save will appear.Step 3: click “Save”, and select path to save.Step 4: The user may review the log from the server concerned.2.9 System tool2.9.1 Change passwordAfter login, click the label of “Tools” to open this interface. Only administrator is entitled to changethe password of login.For changing administrator password, it’s required to enter new password into “New password” fieldand “Confirm new password” field, then click “Submit”.The password being used by operator will be displayed as hidden codes, which could be changed byadministrator at any time. The administrator is allowed to change the operator’s password by enteringnew password into “Operator password>password”.
