NewLine IB SERIES User Manual

15Status of the power indicator is as follows:● Recommended configuration:CPU: Inter (R) Core i3 2.27GHz or AMD CPU with equivalent performanceMemory: 1GBHard drive: 1GBGraphics card: supports DirectX 9 or above● If the interactive panel is equipped with the latest versionof handwriting software in the PC before being delivered,please skip the step.● HID drive-free function only applies for Vista, Windows 7or higherversion (realize the functions of multi-touch etc.). The touch LCDdisplay with Windows XP version should install/run the softwarefor normal use.Step 1: Insert the official USB cable into the USB ports of the computerand touch LCD display.Step 2 : Insert the official software installation disk into the computer.Power Indicator StatusNo light Powered offRed Stand byGreen Powered onPower offSoftware InstallationStep 1: Press PC Power to turn off the OPS (for all-in-one models only).Step 2: Press Power on the control panel or Power on the remotecontroller to enter the standby status. The power indicator turnsred.Step 3: In the standby status, switch off the rocker switch to turn off theinteractive panel.● Turn off the OPS before you turn off the interactive panel.Otherwise, the computer may be damaged.● Disconnect the interactive panel from power after the panel entersstandby status. Otherwise, the panel may be damaged. A suddenpower failure may damage the interactive panel.● Frequent power on and off in a short time may cause faults.