Page 50/79 GEO M10 HARDWARE SETUP PROCEDURE6.4.4 MSUB15 flown with Touring BumperRequired items- 1 or 2 hoists (not provided).- 1 x VNT-BUMPM10- 1 x VNT-EXBARM10 to fly on a single rigging pointIMPORTANTWhen flying MSUB15 cluster, VNT-BUMPM10 must be set at 0°- If cluster is flown from 2 points, bumper must be maintained horizontal in its definitiveposition as well as when lifting or lowering the cluster- If cluster is flown from a single point, extension bar must be used and hoist connectedto “G” positionIMPORTANTMaximum MSUB15 quantity for flown vertical cluster with VNT-BUMPM10 is 8.Please check NS1 for mechanical Safety Working Load and acoustic computations.IMPORTANTMotor hoist must be rated to support entire cluster weight. Please check configurationin NS1 for proper motor hoist rating
