RS HARDWARE SETUP PROCEDUREPage 26 / 76 System Manual RS Series5.3.2 RS18 DollyIMPORTANTTransporting RS18 on Dolly requires that flying plates are installed on ALL CABINETS so that RS18’s canbe secured together.RS18 Dolly is designed for up to 3 RS18’s and bumper. Never exceed these quantities.The first RS18 must be locked to the RS18 dolly using 4 push-pins according to below drawing;Subsequent RS18s are stacked on top using four push-pins per additional cabinet to secure the assembly.Bumper is to be attached to the top cabinet.
