RS HARDWARE SETUP PROCEDUREPage 32 / 76 System Manual RS Series• Adjusting 0° along the cabinet widthAdjusting horizontality along cabinet depth is done by properly adjusting the bumper axis as described in drawings below:Do not forget to secure the axis with “R” clips once horizontality is achieved. Assembly is now ready for second RS15connection.Flying the second RS15- Lift assembly to sufficient height in order to connect a second RS15- Connect second RS15 to first RS15 flying system link plates- Ensure quick release pins are properly lockedOMNI MODE DIRECTIONAL MODE / ALTERNATEDDIRECTIONAL MODE / BACK TO BACKDIRECTIONAL MODE / FACE TO FACE
