Nidac 2 Series Instructions Manual
Also see for 2 Series: ManualInstructions
       | |
PAC2Dual Door Access Controller“Series 2”IMPORTANT DIFFERENCES FROM SERIES 11. All programming can only be done through devicesattached to DTA1.2. A PACDL data logger revision 4.0 or higher attached tothe DLOG terminal is able to program all features (i.e.times, relay type, etc.) and codes (including themanagement code) on the PAC2 series 2.3. When using a PACDL revision 4.0 or higher with a PAC2Series 2 it is not necessary to have a management codeprogrammed.iTABLE OF CONTENTS PAGEIntroduction..................................................................1Features........................................................................1Specifications...............................................................2Terminal Descriptions..................................................3Programmable Features Description ..........................5Automatic Relock Function........................................5Door Open Too Long.................................................5Door Forced Open ....................................................5One Minute Lockout ..................................................6Use Two Codes.........................................................6Installation....................................................................7Basic Keypad Wiring .................................................7D.C. Lock..................................................................8A.C. Lock ..................................................................8Egress Switch ...........................................................8Door Switch ..............................................................8Programming................................................................9Keypad Responses .................................................10Reset All Memories Codes ......................................10Basic Set Up Sequence...........................................11Automatic Relock. Memory 80................................12EGRESS Switch Type. Memory 81.........................12ELC Relay Type. Memory 82..................................12ELC Operating Time. Memory 83 ...........................13iiDoor Input Enable. Memory 84...............................13Door Open Too Long Timer. Memory 85 ................13Door Forced Open Detection. Memory 86...............14One Minute Lockout. Memory 87............................14Use Two Codes. Memory 88 ..................................14Two Codes Timing. Memory 89 ..............................15The Management Code. Memory 9 ........................16User Codes. Memories 000 to 399 .........................17To Program In A New User Code .......................18To Change The Code Type ................................18To Delete A User Code ......................................19Design Philosophy - Problems and Solutions..........20Warranty .....................................................................20Security & Protection.................................................21Other Models And Accessories.................................21Programming Summary.............................................22 |
Related manuals for Nidac 2 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine