Nidec DT-361 Instruction Manual

Also see for DT-361: Instruction manual

Nidec DT-361 Instruction Manual Manual pdf 20 page image

204.5 Memory functionEach setting value can be saved and read out.4.5.1 Saving each setting valueThis function is used to save each setting value.There are two types of saving methods, one is to save a parameter by pressing and holding the“LOAD(SAVE)” key, and the other is to save a setting value by turning the power OFF.The number of data entries that can be set is five on internal oscillation emission and externalsynchronous emission respectively when saving by the “LOAD(SAVE)” key, and one when savingby power OFF.Setting values that can be savedSaving method Save a parameter using the“LOAD(SAVE)” key Save when the power is turned OFFEmission status when the value is savedInternaloscillationemissionExternalsynchronousemissionInternaloscillationemissionExternalsynchronousemissionMemory number that can be saved 1 to 5 1 to 5 - -Emission mode (INT/EXT) × × ○ ○Setting mode (FPM/DUR/PHA) ○ ○ ○ ○Internaloscillationemission(INT)Emission frequency (FPM) ○ × ○ ○Emission duration (DUR) ○ × ○ ○Delay angle (PHA) ○ × ○ ○Delay time (PHA) ○ × ○ ○Externalsynchronousemission(EXT)Emission duration (DUR) × ○ ○ ○Delay angle (PHA) × ○ ○ ○Delay time (PHA) × ○ ○ ○