Nidec Unidrive M400 series Quick Start Manual

Also see for Unidrive M400 series: Power Installation Guide Installation sheet User guide Step-by-step guide Step-by-step guide

Nidec Unidrive M400 series Quick Start Manual Manual pdf 34 page image

34 Unidrive M400 Quick Start GuideIssue Number: 86.2 Unidrive M400 parameter descriptionsKey:Set Pr 00.001 at the required minimum output frequency of the drive for both directions of rotation.The drive speed reference is scaled between Pr 00.001 and Pr 00.002. Pr 00.001 is a nominal value;slip compensation may cause the actual frequency to be higher. When the drive is jogging, Pr 00.001has no effect.Set Pr 00.002 at the required maximum output frequency for both directions of rotation. The drivespeed reference is scaled between Pr 00.001 and Pr 00.002. Pr 00.002 is a nominal value; slipcompensation may cause the actual frequency to be higher. The drive has additional over-speedprotection.Set Pr 00.003 at the required rate of acceleration. Note that larger values produce loweracceleration. The rate applies in both directions of rotation.RW Read /Write RO Readonly Num Numberparameter Bit Bitparameter Txt Text string Bin Binaryparameter FI FilteredNDNodefaultvalueNC Notcopied PT Protectedparameter RA Ratingdependent US User save PS Power-downsave DE Destination00.001 Minimum SpeedRW Num USOL 0.00 to Pr 00.002 Hz  0.00 HzRFC-A00.002 Maximum SpeedRW Num USOL 0.00 to 550.00 Hz  50.0 Hz default: 50.00 Hz60.0 Hz default: 60.00 HzRFC-A00.003 Acceleration Rate 1RW Num USOL 0.0 to 32000.0 s/100 Hz  5.0 s/100 HzRFC-A