Night Owl 16 Channel H.264 Video Security Kit Instruction Manual

Also see for Zeus-85: Specifications

Night Owl 16 Channel H.264 Video Security Kit Instruction Manual Manual pdf 16 page image

User’s Manual145.2 Main MenuRight-click the mouse, a pop-up menu will be displayed onthe screen. Click “MAIN MENU” button on the pop-upmenu to enter into Main Menu. You can also use the Menubutton on the front panel to open the Main Menu. Whenusing the front panel buttons, use the FWD and REWbutton to move in the menu, and use the SEL button toselect the icon. Use the ESC button to return to previouswindow. In Main Menu, you can change settings such asRecord Settings, Playback, Network, Camera, or Systemsettings such as Hard Disk Drive, Video Output, System Maintenance etc.5.2.1 Recording Functions5.2.1.1 Record SetupSelect Main Menu  Record Settings  RecordFunctions to open the RECORD SETUP menu. Theadjustable options are as follow:Record: Allows you to turn each channel ON/OFF.Audio: Allows you to Enable/Disable the audio port if youhave audio enabled camera installed.Quality: Choose between “Good”, “Better”, and “Best”resolution.Copy: Use this option to duplicate the setting of one channel to anotherFile Size: Set the file size limit of each recorded clip.Framerate: Choose the frame rate of your recording.Resolution: Choose between “D1” (Highest), “HD1” (Mid), and “C1F” (Low) resolutions.REC. MODE: Choose between Time Schedule Record or Continuous. Time Schedule willallow you to set motion detection or record at a specific time of day/night.Note: Select Time Schedule Record and the select Schedule to access the below menu.SCHEDULE recording options include ALL, CH-1, CH-2,CH-3, CH-4…CH-16 respectively. Please select the optionyou need to record according to the schedule, the channelyou have set will be highlighted in “Blue” and channels youhave not set will be “Grey”.To setup weekly schedules, click on the box of the corresponding time. Choose betweenMotion, Continuous, or No Recording and then click on each box in the schedule time linethat you want to apply the select record type to. You can also use the “From – To” pull-downmenus and Copy button to copy settings from one day to another. After you havecompleted the schedule, click “Apply” button to save the settings.You can also click on the Default button to use the system defaults. The system defaultsettings are:Alarm all time on = Motion Detection = ON