Night Owl HDA30 series User Manual
Also see for HDA30 series: Quick setup guide
                                                                            | |
Contents
| 
17Chapter 4: Camera InstallationCameras, additional cables, power adapters andsplitters only included in certain security kits. Checkthe product packaging for detailed kit contents.Make sure all cameras are working prior to mounting byconnecting them as described in the section above. Once allcameras are confirmed to be fully operational, you can runthe cables and mount the cameras in their final locations.4.3 Mounting the CamerasCamera distance from DVR.The further the camera is from the DVRor monitor, the higher the chancesof signal degradation. The camera’spower supply should be locatedas near to the camera as possiblewhen the distance exceeds 200 ft.as the power level will drop overextended distances resulting in video degradation.Do not place near high voltage wires or other sources of electrical interference.Electrical interference will degrade the quality of the signal.Place camera out of reach to avoid vandalism.Avoid direct exposure to weather. Do not place the camera where rain or snow willhit the lens directly or where the sun or bright light shines directly into the lens.Your camera is weatherproof, but it will not work when submerged in water. Ensurethat all power and video connections are not directly exposed to water and areprotected from the elements.Mounting surface. The mounting surface must hold at least four times thecamera’s total weight. To mount your cameras:1. Locate a camera and choose a location where you would like to mountthe camera.Connect all cameras locally before final placementto ensure that all components function properly. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine