Night Owl HDA30 series User Manual
Also see for HDA30 series: Quick setup guide
                                                                            | |
Contents
| 
49Chapter 7: Menus and SettingsBuzzer: Enable an audible alarm when the PIR sensor detects heat.Sensitivity: Adjust the sensitivity of the motion sensor. A lower setting will requiremore movement in the camera’s field of view for a recording to be triggered.Motion Area: Selecting Setup will allow you to configure which areas in thecameras field of view will and will not detect motion. Red boxes denote areas thatwill detect motion and uncolored boxes denote areas that will not. When finished,right click to return to the menu.Post Recording: Determine how long you would like the camera to continue recordingafter the event which triggered the recording has ended. You can choose between 30and 300 seconds.Show Message: Checking this tick box will result in a red “M” appearing on-screenwhen motion is detected while in Live View.Send Email: Checking this tick box will result in an email alert being sent whenmotion is detected. See section 7.1.2 for email setup and configuration.Full Screen: Checking this tick box will result in the selected channel going to fullscreen when motion is detected.Push Notification: Checking this tick box will result in push notifications beingsent to your mobile device when motion is detected on the selected channel. Bydefault, this setting is enabled.Record Channel: This option allows you to set other cameras to begin recordingwhen motion has been detected on another camera. For instance, if you are onChannel 1 (Channel field) you can set Channel 2 and 3 to begin recording whenmotion is detected on Channel 1.7.1.4 (b) Motion Area SetupThis system uses both motion sensors and infrared sensors to ensure the numberof false alerts produced are minimal. Current motion detection technology allows |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine