User’s Manual415.2.12 Motion DetectRed = Motion Detection EnabledClear = Motion Detection DisabledNOTE: You can click and drag the mouse cursor when selecting/deselecting the motion area.5.2.13 System Function5.2.13.1 Time SetClick “MAIN” “SYSTEM” “DATE/TIME” to enter the TIME SETUP window to modifysystem date, time, date/time format and time zone, DST (day saving time).To configure the Motion Detection function ofthe DVR, click “MAIN” “DEVICE” “MOTION”to enter the MOTION DETECT window.STATUS: This option allows you enable motiondetection on the channels.SENSITIVITY: This option allows you to setsensitivity level of motion detection from 1 to 4 with4 being the most sensitive.MD AREA: Click this button of the correspondingchannel to select the area you want to have motiondetection. The channel is separated into a 13*10area. When any movements in the selected areaare detected, recording or alarm will be triggered.The semi-transparent area means no motiondetection will be performed in those areas.To access the SYSTEM SETUP menu, select MainMenu SYSTEM to open the SYSTEM SETUP menu.The SYSTEM SETUP Menu includes: DATE TIME,PASSWORD, VIO, LANGUAGE, INFO, andMAINTAIN.• DATE: Enter the day, month, and year• DATE FORMAT: Select DD/MM/YYYY,MM/DD/YYYY, or YYYY/MM/DD• TIME: Enter the time• TIME FORMAT: Use the drop-down menu andselect 12HOURS or 24HOURS• DST: Use the drop-down menu to select ON/OFFto enable/disable Daylight Savings Time.