NightStick XPR-5572RM Instruction Manual

NightStick XPR-5572RM Instruction Manual Manual pdf 1 page image

Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.nightstick.comINS-XPR-5572RM-17 9-19-2017THE XPR-5572RM IS APPROVED FOR USEWARNINGS - INTRINSICALLY SAFEy WARNING: Use only the approved Nightstick 5572-BATT Lithium-ionrechargeable battery pack or the approved non-rechargeable batterieslisted below.y WARNING: To prevent ignition of a hazardous atmosphere, do not openthe battery compartment or attempt to exchange any of the supplied batterypacks while in the hazardous environment. This task must ONLY beperformed in an area known to be non-hazardous.y WARNING: To prevent ignition of a hazardous atmosphere, the approvedNightstick 5572-BATT Lithium-ion rechargeable battery pack must only becharged in an area known to be non-hazardous.y WARNING: When using non-rechargeable batteries in the Nightstick5570-BATT, use only Energizer EN91 or Energizer E91 batteries.y WARNING: To prevent ignition of a hazardous atmosphere, non-rechargeable AA batteries must only be changed in an area known to benon-hazardous.y WARNING: To reduce the risk of explosion, do not mix new non-rechargeable batteries with used non-rechargeable batteries, or mix non-rechargeable batteries from different manufacturers.y WARNING: Substitution of components may impair intrinsic safety.SPECIAL INSTRUCTIONS FOR INTRINSIC SAFETYy For personal safety, always confirm the rating of any known hazardous orpotentially hazardous location where the Angle Light is to be used.CAUTIONy Rechargeable Lithium-ion batteries must be used and charged properly.Improper use can result in serious injury, fire, or death.y Do not leave the battery in direct sunlight or use or store the battery insidecars in hot weather.y Do not expose the battery to water or salt water, or allow the battery toget wet.y Do not store the battery with metallic objects that may cause a short circuit.y Immediately discontinue use of the battery if the battery emits an unusualsmell, feels hot, changes color, changes shape or appears abnormal inany way.y Keep out of the reach of children.MOUNTING THE CHARGERWARNING: While the XPR-5572RM Angle Light is certified as anIntrinsically Safe Permissible product, the charger is NOT IntrinsicallySafe. The charger MUST be installed in a location far enough outside ofthe hazardous environment to ensure that it can never come in contactwith any potentially explosive materials.Tools required for installation:y A small levely A hammery A small center punch or naily An electric drill and drill bits to suit the wall material and anchoring methody A #2 Phillips Head Screwdrivery Torx Wrench (included)The Nightstick 5572-CHGR1 wall/vehicle charger is designed to mount toany flat, dry surface. The design of the charger will secure the Angle Lightinto the charger at virtually any angle. As such, the charger can be mountedat any angle. For purposes of these instructions, we will be mounting thecharger vertically.Included with the wall/vehicle charger are 4 - #8 x 32 x 1 ½” Pan HeadScrews that can be used to install the charger to virtually any surface howeverspecial mounting requirements may require different hardware.y To install the charger, use the full-size DRILLING DIAGRAM TEMPLATElocated here in the instructions.y Select a location to install the charger making sure to check what is onthe other side of the mounting surface…no electrical wires, water lines, etc.y The other consideration for determining the mounting location of thecharger is the distance to the AC wall outlet or the 12v DC power outlet.Please check to make sure that the appropriate Nightstick AC or DC PowerSupply will reach the charger when it is plugged in. Otherwise, relocate thecharger’s installation location as needed.y Once the appropriate location has been selected, tape the template inplace using blue painter’s tape (or other non-marring tape) ensuring thatthe template is level.Included in the box - Compris dans la boîte - Incluido en la cajaInstruction ManualXPR-5572RMUS PATENT 9,713,217THANK YOU FOR SELECTING THE NIGHTSTICK XPR-5572RMINTRINSICALLY SAFE PERMISSIBLE RECHARGEABLE ANGLE LIGHTW/MAGNETIC BASE!Please read these instructions before using your Nightstick XPR-5572RM.They include important safety information and operating instructions.Permissible Nightstick XPR-5572 Flashlight/FloodlightAPPROVAL No. 20-A150005-0TESTED FOR INTRINSIC SAFETY IN METHANE-AIR MIXTURES ONLYWARNINGS: Do not charge in hazardous location. MSHA approved for use with BaycoLi-ion Battery Pack 5572-BATT or Primary 5570-BATT Battery Pack containing 6 AAEnergizer Type EN91 or L91 batteries. Replace the Battery Pack in fresh air only. Do notmix batteries from different manufacturers or different types. Battery Pack to be replaced bya qualified technician only. The Model Nightstick 5572 must not be opened in areas wherepermissibility is required. Substitution of components may impair Intrinsic Safety.CLASS I DIV I GRPS A-D T3CLASS II & III DIV I GRPS E-GCLASS I ZONE 0 Group IIC T3CLASS II ZONE 20 Group IIIC T3-20ºC ≤ Tamb ≤ +70ºC0359E 467756Ex ia FLASHLIGHT FOR USE IN HAZARDOUS LOCATIONSUL listed for use with Bayco Li-ion Battery Pack5572-BATT or Primary 5570-BATT Battery Packcontaining 6 AA Energizer Type EN91 or E91 batteries.