NightWatcher SWNW520 Use And Care Manual
         | |
7Operation (continued)5 Testing the light fixture 6 Ensuring correct operationNOTE:Allow for approximately 1-minute calibration time beforethe sensors resume normal activity.□ Plug in the unit to active the light, the light is nowunder Night Mode.□□ Movement will activate the sensors and turn thelight on. The light will turn the light head to thedetected zone for approximately 3 minutes.□ After the light is activated, keep out of the detectionarea and the light will switch off automatically after3 minutes. The light will be activated again when itdetects any movement. If there is continuousmovement in the detection zone, the light will stayon unit movement ceases (after 3 minutes).□ To ensure correct operation of the sensor,mount the unit so that the motion passesacross the motion sensor according to theGood Sensitivity diagram below.Top ViewGood SensitivityLess Sensitivity |
Related manuals for NightWatcher SWNW520
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine